Robotul NinjaTrader: instalare, setări și suport

Instalezi robotul TradeLog în NinjaTrader 8, îl configurezi corect și înțelegi fiecare setare și fiecare mesaj pe care le afișează.

Robotul TradeLog pentru NinjaTrader este un panou de tranzacționare și o pază a riscului, așezat pe graficul tău. Calculează mărimea poziției pentru riscul pe care l-ai ales, plasează tranzacția împreună cu stopul și ținta ei, continuă să supravegheze după execuție și sincronizează totul în jurnalul TradeLog.

Ce nu va face niciodată

Acestea sunt limite pe care robotul și le impune singur, nu funcții care lipsesc. Merită știute înainte să începi.

Nu mută niciodată un stop pe o tranzacție deja deschisă. Linia care urmărește prețul este doar o linie de plan.
Nu decide niciodată când cumperi sau vinzi. Nu există semnal și nici intrare automată: tu apeși, el dimensionează și protejează.
Nu atinge niciodată un ordin mai mare decât poziția căreia îi aparține, pentru că acela nu este o protecție, iar robotul nu poate ghici ce ai vrut cu el.
Nu poate citi tranzacțiile făcute înainte să îl instalezi. NinjaScript nu le expune.

De ce ai nevoie

NinjaTrader 8, versiunea 8.1 sau mai nouă.
Un cont NinjaTrader pe care poți tranzacționa. Sim este locul potrivit pentru început.
Un plan TradeLog care include sincronizarea automată — Basic sau Premium.
Cheia ta API din TradeLog, de la Setări apoi Chei API.

Instalarea

1În TradeLog mergi la Setări, apoi Chei API, și creezi o cheie pentru NinjaTrader. Se arată o singură dată, deci copiaz-o acum.
2Descarcă fișierul robotului din pagina Conexiuni. Este o singură arhivă zip — nu o dezarhiva.
3Doar dacă ai instalat vreodată robotul ca fișier sursă — un .cs lipit în NinjaScript Editor, cum au făcut testerii dinainte de septembrie 2026: șterge-l întâi, altfel importul eșuează cu „duplicate method names". În NinjaScript Editor deschide Indicators, dă clic dreapta pe TradeLogSyncV3, alege Remove și lasă NinjaTrader să recompileze.
4În NinjaTrader deschide Control Center și alege Tools, apoi Import, apoi NinjaScript Add-On…
5NinjaTrader arată un avertisment standard despre add-on-urile de la terți. Apare imediat după ce alegi meniul, înainte să alegi fișierul, și apare pentru orice add-on care nu vine de la NinjaTrader — inclusiv al nostru. Apasă OK.
6Alege fișierul zip și confirmă. NinjaTrader îl compilează și îți spune că a reușit. Dacă îți cere repornirea, repornește.
7Deschide un grafic al instrumentului pe care vrei să tranzacționezi.
8Clic dreapta pe grafic, alege Indicators…, găsește TradeLogSyncV3 în lista din stânga și dă dublu clic pe el. Acesta e numele sub care îl listează NinjaTrader; pe grafic scrie apoi TradeLog Sync cu versiunea lui.
9Completează setările din dreapta — secțiunea următoare spune care și în ce ordine — apoi apasă OK.

Robotul TradeLog pornit pe un grafic NinjaTrader

Prima configurare, în ordine

1Setarea 1.1 API Key: lipește cheia copiată din TradeLog. Lipește-o exact, fără spații înainte sau după. Fără ea nu funcționează nimic.
2Setarea 2.1 Risk per trade - manual override ($): las-o goală, dacă nu vrei să rulezi fără ca TradeLog să îți conducă riscul. În mod normal riscul vine din Strict Risk Management din aplicație, iar caseta asta este ignorată.
3Setarea 2.2 Default reward:risk: cât de departe se desenează prima dată linia Take-Profit față de stop. O poți trage la fiecare tranzacție.
4Setarea 3.2 Guardian: watch every symbol on the account: las-o pornită, ca să fie protejat tot contul, nu doar graficul acesta.
5Setarea 6.1 Write diagnostics to the Output window: las-o oprită. O pornești doar când ți-o cere suportul.

Fiecare setare, explicată

Aceasta este lista completă din Parameters, în ordinea în care o arată NinjaTrader, generată chiar din robot ca să nu se poată abate de la ce ai pe ecran. Numerele sunt cele pe care le poți cita la suport.

Setările de mai jos sunt scrise exact cum apar în dialogul Parameters din NinjaTrader, în engleză. NinjaTrader nu le traduce, deci cuvintele de aici sunt cuvintele de pe ecranul tău.

1. TradeLog Account

1.1API KeyImplicit: (empty): START HERE. Your TradeLog API key, so the robot can reach your account. Where to find it: sign in at tradelog.cot-reports.com, then Settings -> API Keys. Paste it exactly as shown. Without a key the robot cannot size a trade or send anything to your journal.

2. Risk

2.1Risk per trade - manual override ($)Implicit: 0: OPTIONAL. Normally your Risk comes from TradeLog: whatever you set under Strict Risk Management in the app is what the robot uses, and this box is ignored. Fill it in only to run WITHOUT that - then also switch on 'Use the manual Risk above' below. Example: 500 means a stop-out costs about 500. 0 = nothing is trimmed (fail-safe).; Interval acceptat: 0 or more
2.2Default reward:riskImplicit: 2: How far the Take-Profit line is first drawn compared with the Stop-Loss distance. 2 means the target sits twice as far from entry as the stop. You can always drag the line afterwards.; Interval acceptat: 0.1 to 100.0
2.3Maximum contracts per orderImplicit: 100: A fat-finger ceiling: the panel never sends more than this many contracts in one order, whatever the Risk works out to. 0 = no ceiling.; Interval acceptat: 0 or more
2.4Size up to the full RiskImplicit: OFF: OFF by default. ON = when a plan would risk LESS than your Risk, the robot adds contracts until it reaches it, and your Stop-Loss stays exactly where you put it. Only if the contract count hits your 'Maximum contracts per order' cap first does the Stop-Loss move AWAY from entry instead - and the panel says so when it happens. Example: Risk 150, one contract risks 1.50 - it takes 100 contracts, so with a 100 cap nothing moves; with a 20 cap the stop moves out until 20 contracts risk the full 150. One of the two settings that can INCREASE position size, which is why it is off unless you turn it on.
2.5Allow 1 contract even if it exceeds the RiskImplicit: OFF: OFF by default. When your Stop-Loss is so far from Entry that even ONE contract would risk more than your Risk, the panel refuses and shows Contracts: 0. ON = it places that one contract anyway and says in red, on the panel, that you are over your Risk. It NEVER places more than one, so the overshoot is only ever what a single contract costs at the stop you drew. Example: Risk 500 on ES with a 55-tick stop - one contract risks 687.50. The second of the two settings that can INCREASE what you lose, which is why it is off unless you turn it on.

3. Protection

3.1Use the manual Risk above instead of TradeLogImplicit: OFF: OFF (default, recommended) = your Risk comes from TradeLog and the box above is ignored. ON = run without TradeLog driving the Risk: the Guardian trims to the manual amount above instead. Switch this on only if you want the robot to ignore the app.
3.2Guardian: watch every symbol on the accountImplicit: ON: ON (default) = the whole account is protected, not only the instrument on this chart - including trades you opened outside the TradeLog panel. OFF = only this chart's instrument is protected and every other instrument is left alone. This is SCOPE only - it never switches trimming on by itself. With the robot on several charts of one account, only ONE of them trims; the others say so on their panel.

4. Sync

4.1Sync interval (seconds)Implicit: 30: How often open positions are sent to your TradeLog journal. Lower = fresher, and more requests. 30 suits almost everyone.; Interval acceptat: 10 to 300

5. Display

5.1Show the trading panelImplicit: ON: ON (default) = the Buy/Sell panel is drawn on the chart. OFF = no panel; the robot still watches and protects, it just gives you nothing to click.
5.2Panel coloursImplicit: Dark: Auto = follow the chart background. Or force Light / Dark.; AutoLightDark
5.3Panel positionImplicit: TopLeft: Which corner of the chart the panel starts in. You can also drag it by its header.; TopLeftTopRightBottomLeftBottomRight
5.4Messages on the chartImplicit: Expanded: Where the message card starts: Expanded (default) or Collapsed (only its header chip, for a clean chart). The arrow opens and closes it either way, and an ALARM is never missed - while one is standing the folded chip turns red and carries the warning mark.; ExpandedCollapsed
5.5Show shortcut keys on the buttonsImplicit: ON: ON (default) = each button shows the key that triggers it - BUY (B), SELL (S), LONG (L), SHORT (K), MARKET/PENDING (O), REFRESH (R). The keys keep working either way; this changes the LABEL only.
5.6Show tooltips on active buttonsImplicit: OFF: OFF (default) = hovering a button that is READY to be pressed shows nothing, so the panel never covers the chart while you wait for your moment. ON = every button explains what the press will do. A button that is GREYED OUT always explains why it cannot be pressed, whatever this is set to - that reason exists nowhere else. The 'i' in the panel header is exempt for the same reason.
5.7Labels on the plan linesImplicit: ON: ON (default) = each Entry / Stop-Loss / Take-Profit line carries a small label with its price.
5.8Label text colourImplicit: White: The colour of the words inside the Entry / Stop-Loss / Take-Profit label. The label itself is a filled marker in the LINE'S own colour (blue / red / green), the way NinjaTrader draws its own order labels, so White (default) reads on all three. Choose Black if you prefer dark text on the coloured marker.; BlackWhite
5.9Label positionImplicit: Left: Where each label sits on its line. Left (default) = in a box at the left end of the line, set back from the right-hand price scale, the way NinjaTrader keeps its own order labels clear. Center = over the middle of the line.; CenterLeft
5.10How long the plan lines areImplicit: To last candle: To last candle (default) = the lines stop at the newest candle, like a NinjaTrader order line. To right edge = they carry on past it, so you can read the level against price. Full width = right across the visible chart.; To last candleTo right edgeFull width
5.11Prices on the price scaleImplicit: ON: ON (default) = the Entry / Stop-Loss / Take-Profit prices also appear on the price scale at the right. OFF = the lines and their labels stay exactly as they are, with no price on the scale.
5.12Stop-Loss line follows priceImplicit: ON: ON (default) = while you are setting a trade up, the Stop-Loss line is pushed along so it stays on the correct side of Entry - never back towards Entry. PLANNING LINES ONLY: it can never move a stop on a trade you have already opened.
5.13Take-Profit line follows priceImplicit: ON: ON (default) = the same for the Take-Profit line, so the market cannot end up past your target before you have even entered. PLANNING LINES ONLY: it can never move a target on a trade you have already opened.
5.14First Stop-Loss distance (ticks)Implicit: 0: How far from Entry the Stop-Loss line is drawn the FIRST time, in ticks. 0 = automatic, from recent volatility. Set a value if the lines seed too close together to grab with the mouse. DISPLAY ONLY - you still drag the lines to your real levels, and position size is always calculated from where you drag them.; Interval acceptat: 0 to 1000000
5.15First Take-Profit distance (ticks)Implicit: 0: How far from Entry the Take-Profit line is drawn the FIRST time, in ticks. 0 = automatic, from the reward:risk above. DISPLAY ONLY - you still drag the lines to your real levels.; Interval acceptat: 0 to 1000000

6. Advanced

6.1Write diagnostics to the Output windowImplicit: OFF: OFF (default). ON = the robot prints what it is doing, for support. It does not change how it trades.

Panoul și ce îți spune

Panoul îți spune în cuvinte ce face, ca să nu ghicești. Un buton gri explică întotdeauna de ce nu poate fi apăsat, iar cardul de mesaje de sub panou poartă tot ce are nevoie de atenția ta. Cele importante sunt mai jos.

Cum se citesc numerele R

Două cifre de pe panou poartă o literă, iar litera spune la ce întrebare s-a răspuns. F e R Financiar și e despre bani: suma împărțită la Riscul pe care l-ai setat pentru o tranzacție, deci „-0.92R F" înseamnă că ești pe minus cu 92% din riscul unei tranzacții. Împarte la riscul pe care l-ai planificat, nu la riscul pe care îl ia efectiv numărul rotunjit de contracte — de aceea același plan poate arăta 1.67R F pe linia de recompensă în timp ce raportul de deasupra scrie 1 : 2.0. NinjaTrader nu are o setare de comision pe care robotul s-o poată citi, deci F sunt banii bruți din preț, înainte de ce îți ia brokerul. T e R Tehnic și e despre distanță: „Risk to Reward (T) 1 : 2.0" înseamnă că ținta e de două ori mai departe de intrare decât stopul. T e un raport, niciodată un multiplu — de aceea se scrie 1 : 2.0 și nu 2.00R.

Sunt aceleași două litere pe care le folosește jurnalul tău. Pe un plan jurnalul le măsoară exact ca panoul; după ce tranzacția se închide, le recalculează pe amândouă pe banii care au intrat cu adevărat, deci F-ul unei tranzacții închise e net de comisioanele pe care chiar le-ai plătit. Literele își păstrează înțelesul — se schimbă banii pe care îi împart.

Mesajele sunt scrise în cuvintele robotului, în engleză, ca să poți potrivi litera cu litera ce ai pe grafic. Explicația de sub fiecare este tradusă.

(+{count} more instrument over-protected)

Chart — the message card under the panel

A tail added to the STOP/TARGET over-protection alarm when a second instrument is also over-protected. It never appears on its own.

Ce faci. Check that instrument as well.

(+{count} more instrument)

Chart — the message card under the panel

A tail added to an orphan- or resting-order alarm when a SECOND instrument has the same problem. It never appears on its own — look for it at the end of one of those lines.

Ce faci. Check your other instruments too — the message names only the first.

(+{count} more instruments over-protected)

Chart — the message card under the panel

The same tail when several more instruments are over-protected. It never appears on its own.

Ce faci. Check every open instrument as well.

(+{count} more instruments)

Chart — the message card under the panel

The same tail when several more instruments are affected. It never appears on its own — look for it at the end of an orphan- or resting-order alarm.

Ce faci. Check every open instrument — the message names only the first.

An ATM strategy manages {instrument} — TradeLog will NOT resize its stop/target (NinjaTrader forbids it) and has STOPPED auto-trimming this instrument. Reduce it from the ATM, or close it.

Chart — the message card under the panel

An ATM strategy owns the protection on that instrument. NinjaTrader forbids anything outside the ATM from resizing it, so the robot has stopped trimming that instrument.

Ce faci. Reduce the position from the ATM itself, or close it.

an older TradeLog robot is still installed — remove it

Chart — the message card under the panel

An older version of this robot is still installed on this machine. If both are on charts, two copies are watching the same account and both may act.

Ce faci. Remove the old one from every chart, delete its file from Documents\NinjaTrader 8\bin\Custom, and press F5 in the NinjaScript Editor. Keep only the current one.

AUTO (not connected)

Panel — the licence row, and the sentence on the chart

The Risk value should come from TradeLog, but the connection is not confirmed.

Ce faci. Check the API key first — that is the usual cause. If the key is right and your own connection is fine, ours is down; the robot keeps retrying and your broker link is unaffected.

AUTO (refreshing)

Panel — the licence row, and the sentence on the chart

A refresh of the Risk value from TradeLog is in flight.

Ce faci. Wait a moment.

AUTO (syncing)

Panel — the licence row, and the sentence on the chart

The Risk value is being read from your TradeLog account right now.

Ce faci. Wait a moment. Sizing arms as soon as it arrives.

cannot read the Chart Trader account ({ex})

Chart — the message card under the panel

NinjaTrader raised an error when the robot asked which account is selected.

Ce faci. Re-pick the account in Chart Trader. If it keeps happening, send us the Output window.

Chart Trader is not open on this chart — open it and pick your account

Chart — the message card under the panel

The robot reads which account to protect from Chart Trader, and Chart Trader is not open.

Ce faci. Open Chart Trader on this chart and select your account.

CLOSE {cw} after SL/TP were cancelled — position UNPROTECTED, act now

Panel — the red alarm banner

The same state, when the close was cancelled or rejected rather than failing outright.

Ce faci. Close it in NinjaTrader, or place a stop by hand, right now.

CLOSE failed after SL/TP were cancelled — position UNPROTECTED, act now

Panel — the red alarm banner

The robot cancelled your stop and target in order to close, and then the close itself failed. You are holding a position with nothing behind it.

Ce faci. Close it in NinjaTrader, or place a stop by hand, right now. Then send us the Output window.

EXIT ORDER with NO POSITION on {instrument} ({quantity}) — if it fills it will OPEN a position. Cancel it.

Chart — the message card under the panel

A stop or target order is still working on an instrument where you have no position. If it fills, it opens a new trade.

Ce faci. Cancel it — CANCEL PENDING on the panel, or in NinjaTrader.

EXIT ORDER, NO POSITION

Panel — the red alarm banner

The banner form of the orphan-exit-order alarm.

Ce faci. Cancel that order — CANCEL PENDING, or in NinjaTrader.

GUARDIAN INACTIVE — {the reason}

Chart — the message card under the panel

The robot has no account to protect, so it is not trimming anything. The rest of the sentence says exactly why.

Ce faci. Follow the reason given. In almost every case it is Chart Trader: open it and pick your account.

no account is selected in Chart Trader

Chart — the message card under the panel

Chart Trader is open but no account is chosen, so there is nothing to protect.

Ce faci. Pick your account in the Chart Trader account dropdown.

No account: {the reason}

Chart — the message card under the panel

The reason the robot could not bind to an account, in plain words.

Ce faci. Open Chart Trader on this chart and select your account. If the chart is still loading, wait a few seconds.

PROTECTION ALARM

Panel — the red alarm banner

A protection alarm is standing but the specific wording could not be resolved. The message card under the panel carries the detail.

Ce faci. Read the message card. If it is empty too, send us a screenshot and the Output window.

PROTECTION SHORT — set SL manually ({totalSL}/{livePosQty})

Panel — the red alarm banner

Your resting stop covers fewer contracts than you hold — the numbers in brackets are stop size against position size. The uncovered part has no floor under its loss.

Ce faci. Increase the stop order to cover the whole position, or reduce the position to match the stop.

REVERSED — FLATTEN NOW

Panel — the red alarm banner

The worst outcome the panel can report. A close over-filled and you are now in a position the OTHER WAY round, with nothing protecting it.

Ce faci. Flatten it by hand in NinjaTrader, immediately. Do not wait for the robot to fix it — it will not.

REVERSED after the close — opposite position UNPROTECTED, flatten it manually NOW

Panel — the red alarm banner

The full sentence for the line above: the close reversed you and the new position is naked.

Ce faci. Flatten manually in NinjaTrader now.

starting up

Chart — the message card under the panel

The robot has not finished binding to an account yet.

Ce faci. Wait a few seconds.

STOP/TARGET {protected size} > POSITION {position size} on {instrument} — it REVERSES you if touched. Resize or cancel it by hand.

Chart — the message card under the panel

The protective orders cover MORE contracts than you actually hold. If they trigger, they will close your position and open the opposite one.

Ce faci. Resize or cancel the excess order by hand. This is the one case the robot will not fix for you.

STOP/TARGET > POSITION

Panel — the red alarm banner

The banner form of the over-protection alarm.

Ce faci. See that message: resize or cancel the excess order by hand.

stuck TradeLog order on {instrument} — never sent, so a cancel is accepted but never completes and a CLOSE waits on them and TIMES OUT. If it does, press Close again — that has worked. A NinjaTrader restart should clear them, but that is not confirmed.

Chart — the message card under the panel

An order this robot created never reached the broker. A cancel on it is accepted but never completes, and a CLOSE will wait on it and time out.

Ce faci. Press Close again — that has cleared it before. If it does not, restart NinjaTrader and send us the Output window.

STUCK TRADELOG ORDERS

Panel — the red alarm banner

The banner form of the stuck-order alarm.

Ce faci. Press Close again; if it does not clear, restart NinjaTrader and send us the Output window.

stuck TradeLog orders on {instrument} — never sent, so a cancel is accepted but never completes and a CLOSE waits on them and TIMES OUT. If it does, press Close again — that has worked. A NinjaTrader restart should clear them, but that is not confirmed.

Chart — the message card under the panel

The same as the line above, with more than one stuck order.

Ce faci. Press Close again; if that does not clear it, restart NinjaTrader and send us the Output window.

the account selected in Chart Trader is no longer available

Chart — the message card under the panel

The account that was selected has gone — usually a disconnected connection.

Ce faci. Reconnect in NinjaTrader, then re-pick the account in Chart Trader.

the chart window is still loading

Chart — the message card under the panel

The chart is not finished opening yet.

Ce faci. Wait a few seconds.

this is not a chart — add TradeLog Sync to a CHART

Chart — the message card under the panel

The robot was added somewhere that is not a chart — a Market Analyzer column or a SuperDOM. There is no Chart Trader there, so it has no account and stays inert.

Ce faci. Remove it from there and add it to a CHART instead.

TradeLog has STOPPED auto-trimming {instrument} until it is flat — {the reason}.

Chart — the message card under the panel

The robot tried to trim that instrument and could not, so it has stood down until you are flat again. The end of the sentence names the exact cause.

Ce faci. Act on the named cause — usually resizing or cancelling an order by hand. Trimming resumes on the next position.

Trading BLOCKED — {the reason} (see your TradeLog Journal)

Chart — the message card under the panel

Your TradeLog account has hit a limit you set, and trading is blocked until it resets.

Ce faci. Open your TradeLog journal to see which limit and when it resets.

Trading BLOCKED — Daily/weekly limit reached (see your TradeLog Journal)

Chart — the message card under the panel

The same block, when the server did not say which limit was hit.

Ce faci. Open your TradeLog journal to see which limit and when it resets.

Trading PAUSED — TradeLog cannot check your limits right now

Chart — the message card under the panel

TradeLog could not be reached to check your limits, so trading is paused rather than allowed past a limit that might already be hit.

Ce faci. Nothing — it resumes on its own once the check succeeds, and your broker connection is not involved. If it lasts and your own connection is fine, the problem is ours.

GUARDIAN INACTIVE — this chart cannot identify its account, so it does NOT trim

Chart — the message card under the panel

An account is selected, but the robot cannot work out which one it is, so it refuses to trim rather than trim the wrong account.

Ce faci. Re-pick the account in Chart Trader on this chart. If it persists, send us the Output window.

Guardian: OFF here — protected by {the other chart}

Chart — the message card under the panel

Not a problem. You have the robot on more than one chart of this account, and another chart is the one doing the trimming. Only ever one does, on purpose.

Ce faci. Nothing. The named chart is protecting the account. Everything else on this chart works normally.

NO STOP-LOSS on {instrument} — the Guardian cannot size a risk it cannot see

Chart — the message card under the panel

You have an open position with no stop-loss order behind it. The robot cannot measure a risk that does not exist, so it cannot protect you on this one.

Ce faci. Place a Stop Market order for that position now, or close it.

RESTING ORDER on {instrument} ({quantity}) with no position — if it fills it OPENS one

Chart — the message card under the panel

A working order is sitting on an instrument you are flat on. It can fill at any time.

Ce faci. Leave it if you meant it. Cancel it if you did not.

Risk Source: {the value}

Chart — the message card under the panel

Not a warning — this is the panel repeating its Risk Source line on the chart because the row was too narrow to show it whole.

Ce faci. Nothing. Widen the panel if you would rather read it there.

SL extended — size reached your {your contract cap}-contract cap first, so the Stop-Loss moved out far enough to reach the active Risk.

Chart — the message card under the panel

While sizing up to your full Risk, the contract cap was reached first, so the Stop-Loss was moved further out instead. Your risk in money is unchanged; the stop is not where you drew it.

Ce faci. Nothing, if that is what you wanted. Raise 2.3 Maximum contracts per order, or turn off 2.4 Size up to the full Risk, to keep the stop exactly where you put it.

STOP on the WRONG SIDE on {instrument} ({quantity}) — it does not protect this position, it ADDS to it.

Chart — the message card under the panel

There is a stop order on the same side as your position. If it triggers it will ADD to the position instead of closing it.

Ce faci. Cancel that order. CLOSE POSITION cancels it along with the position; CANCEL PENDING removes it once you are flat.

STOP-LIMIT ONLY on {instrument} ({quantity}) — a stop-limit can trigger and NEVER FILL, so it does not bound your loss and the Guardian will not size against it. Replace it with a Stop Market.

Chart — the message card under the panel

The only protection on that position is a stop-LIMIT. A stop-limit can trigger and never fill, so it does not put a floor under the loss.

Ce faci. Replace it with a Stop Market order.

Target and stop on {instrument} are not linked (no OCO) — when one fills, cancel the other.

Chart — the message card under the panel

The stop and the target are not tied together, so filling one will not cancel the other. You could be left with a live order after the trade is over.

Ce faci. When one of them fills, cancel the other by hand.

{leftToStrategy} owned by a strategy left alone.

Panel — the status row

Appended to a cancel: some orders belong to a strategy or ATM, so the robot did not touch them.

Ce faci. Cancel those where they were placed.

1 contract exceeds the active Risk

Panel — the status row

Even one contract would risk more than your limit at this stop distance, so the panel refuses to place it.

Ce faci. Move the Stop-Loss closer to the entry, raise 2.1 Risk per trade, or switch on 2.5 to allow the single contract deliberately.

1 contract requires a tighter Stop-Loss, or a higher Risk setting.

Panel — the status row

The full sentence behind the line above.

Ce faci. Tighten the stop or raise the Risk.

A close is still settling. The panel arms when it completes.

Panel — the status row

The full sentence behind "Close in progress".

Ce faci. Wait a second.

A Guardian trim is still settling on this instrument. The panel arms when it completes.

Panel — the status row

The full sentence behind "Risk trim settling".

Ce faci. Wait a second.

a hand-placed order cannot go below 1

Inside another message, where it names the reason

Why the Guardian stood down: it may shrink a hand-placed order but never cancel it, so it cannot go below one contract.

Ce faci. Cancel that order by hand if you want the position trimmed further.

A pending entry order placed from this panel is still live at the broker, but this robot has stopped tracking it (the account or the chart changed). If it fills it will have NO Stop-Loss and NO Take-Profit. Cancel it in NinjaTrader, or set its protection by hand.

Panel — the status row

The full sentence behind "Resting order — no SL/TP will attach". If it fills it will be naked.

Ce faci. Cancel it in NinjaTrader, or be ready to set its protection by hand.

a stand-alone order bigger than the position

Inside another message, where it names the reason

Why the Guardian stood down: an order larger than the position is not protection, so it will not act on it.

Ce faci. Resize or cancel that order by hand.

A strategy or ATM owns the order resting on this instrument, so TradeLog will not touch it — cancelling one leg of a bracket can leave a position unprotected. Cancel it where you placed it.

Panel — the status row

The full sentence behind "Resting order — owned by a strategy".

Ce faci. Cancel it where you placed it, not from this panel.

A TradeLog subscription is required. Renew it at tradelog.cot-reports.com to use this robot.

Inside another message, where it names the reason

Your TradeLog plan does not currently allow the robot.

Ce faci. Renew your plan, then press REFRESH.

Account not linked to TradeLog

Panel — the status row

This NinjaTrader account has not been linked to TradeLog, so no Risk can be read for it.

Ce faci. Link the account in TradeLog, then press REFRESH.

Alerts

Panel — the status row

The folded message card, red, because at least one of the lines behind it is an ALARM.

Ce faci. Click it — an alarm is never hidden without saying so.

An ATM strategy manages the {instrAtClick} position — use CLOSE POSITION, or scale out from the ATM

Panel — the status row

HALF and QUARTER cannot act on a position an ATM owns.

Ce faci. Use CLOSE POSITION, or scale out from the ATM itself.

an ATM/strategy owns it

Inside another message, where it names the reason

Why the Guardian stood down: an ATM strategy owns the protection and NinjaTrader forbids resizing it from outside.

Ce faci. Reduce the position from the ATM, or close it.

An order is still being placed. The panel arms when it completes.

Panel — the status row

The full sentence behind "Order in progress".

Ce faci. Wait a second.

API KEY INVALID

Inside another message, where it names the reason

TradeLog answered and rejected the key. Nothing is wrong with your subscription.

Ce faci. Copy the key again from your TradeLog account and paste it into the robot inputs.

API KEY REQUIRED

Inside another message, where it names the reason

No TradeLog API key has been entered at all.

Ce faci. Paste your key into the robot inputs. It is on your TradeLog account page.

Bracket attach failed

Panel — the status row

The Stop-Loss and Take-Profit could not be attached to a fill. The position is open and UNPROTECTED.

Ce faci. Set a stop by hand right now, or close the position. Then send us the Output window.

Cancel requested for {sent} resting orders on {instrument}.{left}

Panel — the status row

The cancel was sent for several resting orders.

Ce faci. Nothing — confirm they disappear from your Orders tab.

Cancel requested for the resting order on {instrument}.{left}

Panel — the status row

The cancel was sent for one resting order.

Ce faci. Nothing — confirm it disappears from your Orders tab.

Cannot reach TradeLog. Your broker connection is not affected - charts, orders and your positions are unaffected. Sizing stays off until the connection is restored. You can still close an open position.

Inside another message, where it names the reason

The connection to TradeLog was confirmed once and has since aged out — we cannot reach our own server. Nothing is wrong with your subscription or your key, and your BROKER connection is untouched: charts, orders and open positions carry on normally.

Ce faci. Check your own connection, then press REFRESH. If yours is fine, the problem is ours and the robot keeps retrying. You can still CLOSE an open position from the panel meanwhile.

cause not recorded

Inside another message, where it names the reason

The Guardian stood down and the reason was not recorded — this one should not happen.

Ce faci. Send us the Output window; we want to see this.

Close error: {ex}

Panel — the status row

An error was raised while closing. The text after the colon is NinjaTrader’s own.

Ce faci. Check the position in NinjaTrader and close it there if it is still open.

Close in progress

Panel — the status row

A close is still settling.

Ce faci. Wait a second.

Close order create failed

Panel — the status row

NinjaTrader refused to create the closing order.

Ce faci. Close the position in NinjaTrader directly, then send us the Output window.

Connected

Inside another message, where it names the reason

The link word: TradeLog is reachable and your account is confirmed.

Ce faci. Nothing.

Connecting

Inside another message, where it names the reason

The link word: the first check is in flight.

Ce faci. Wait a moment.

Connecting to TradeLog

Panel — the status row

The robot is establishing its connection to TradeLog.

Ce faci. Wait. If it stays here, check the API key and the connection.

Connecting to TradeLog. Sizing arms as soon as the connection is confirmed.

Inside another message, where it names the reason

The full sentence behind "Connecting to TradeLog".

Ce faci. Wait. If it stays here, check the API key.

Currency mismatch — can't size

Panel — the status row

The instrument is not priced in your account currency. The robot will not guess an exchange rate, so it refuses to size rather than give you a wrong number.

Ce faci. Trade this instrument from an account in its own currency.

Download it from your Connections page on tradelog.cot-reports.com.

Panel — the status row

The panel is showing a newer version, and this is where the file is. It appears on the badge hover when the server did not send a direct link, and in the Output window once per session.

Ce faci. Open tradelog.cot-reports.com, go to Connections, and download the NinjaTrader robot. Then in NinjaTrader: Tools then Remove NinjaScript Assembly, remove the TradeLog entry, and import the new zip from Tools then Import.

Flatten did not complete

Panel — the status row

The flatten was accepted but the position is still not flat.

Ce faci. Use NinjaTrader's own Close button.

Flatten failed

Panel — the status row

NinjaTrader refused the flatten.

Ce faci. Use NinjaTrader's own Close button. Then send us the Output window.

Flattening {position size} through NinjaTrader (ATM strategy) — this also cancels working orders on this instrument, entries included...

Panel — the status row

The position is ATM-owned, so the robot is using NinjaTrader’s own flatten — which also cancels working orders on this instrument, entries included.

Ce faci. Nothing, but check your working orders afterwards.

Locked In

Panel — the status row

On the Open Risk row: your stops now guarantee a profit. The figure beside it is how much.

Ce faci. Nothing. This is good news.

Margin NOT verified

Inside another message, where it names the reason

Some connections do not report free margin to NinjaTrader. When they do not, the robot says so rather than implying it checked.

Ce faci. Nothing — your connection still checks margin when the order is submitted.

Margin NOT verified — size not checked against free margin

Inside another message, where it names the reason

The full sentence for the line above.

Ce faci. Nothing; the broker still checks at submission.

Messages

Panel — the status row

The folded message card. The number beside it is how many lines are behind it.

Ce faci. Click it to open them.

Minimum size is over the active Risk

Panel — the status row

The smallest tradable size already costs more than your Risk at this stop distance. The panel tells you exactly how much more.

Ce faci. Move the Stop-Loss closer to the entry, or raise 2.1 Risk per trade.

No Access

Inside another message, where it names the reason

The link word: TradeLog refused this account — a lapsed plan or a bad key.

Ce faci. Check your plan and your API key.

No entry price

Panel — the status row

The Entry line has no usable price.

Ce faci. Drag the Entry line onto a real price level.

No free margin left

Inside another message, where it names the reason

Your account reports no free margin, so the broker may refuse this order.

Ce faci. Close something, or reduce the size.

No free margin left — the broker may reject this order

Inside another message, where it names the reason

The full sentence for the line above.

Ce faci. Close something, or reduce the size.

No market price yet

Panel — the status row

There is no bid or ask yet to measure a MARKET entry from.

Ce faci. Wait for the next price and press again.

No open position on {instrument}

Panel — the status row

A label on the exit row: you are flat on this instrument.

Ce faci. Nothing.

No plan lines on the chart

Panel — the status row

The Entry / Stop-Loss / Take-Profit lines are not on the chart, so there is no plan to place.

Ce faci. Press L for a long plan or K for a short plan, position the lines, then press BUY or SELL.

No TradeLog API key is set. Enter your key in the robot inputs.

Inside another message, where it names the reason

The full sentence behind "API key required".

Ce faci. Paste your key into 1.1 API Key.

Offline

Inside another message, where it names the reason

The link word: the robot cannot reach the TradeLog licence server right now. It keeps retrying, and your broker connection is not affected — orders and open positions are untouched.

Ce faci. Nothing while your licence still has time on it. If it stays amber for days and your own connection is fine, the problem is ours — tell us.

on {instrument} cannot be split into {denominator}. {scope} needs at least {denominator}, so CLOSE POSITION is the one that can act.

Panel — the status row

You do not hold enough contracts to take a half or a quarter.

Ce faci. Use CLOSE POSITION.

Order in progress

Panel — the status row

An order is still being placed. The panel arms again when it completes.

Ce faci. Wait a second.

Order resting — SL/TP on fill

Panel — the status row

Your pending entry is waiting at the broker. Its stop and target are NOT there yet — the robot attaches them the moment it fills.

Ce faci. Leave the chart open until it fills.

Override capped to Risk

Panel — the status row

You typed an Override larger than the Risk the Guardian trims to, so it was capped down. A bigger size would have been trimmed the moment it filled.

Ce faci. Nothing — this is the panel keeping the two consistent. Raise 2.1 if you want a bigger size.

Override Risk

Panel — the status row

The Risk in use is the amount you typed into the Override box on the panel, not your usual per-trade Risk. It applies until you clear the box.

Ce faci. Nothing, if that is what you wanted. Clear the Override box to go back to your usual Risk.

Pending

Panel — the status row

A label on the position row: you have resting orders but no open position.

Ce faci. Nothing.

POSITION

Panel — the status row

A label on the exit button — CLOSE POSITION closes the whole position.

Ce faci. Nothing.

Position already at the full Risk

Panel — the status row

Your open position already uses the whole Risk, so adding to it would go over.

Ce faci. Close part of the position to make room, or leave it as it is.

Position unavailable

Panel — the status row

NinjaTrader did not return the position this time.

Ce faci. Wait for the next update. If it persists, check the connection.

POSITION UNPROTECTED — ACT NOW

Panel — the status row

The worst state the panel can show: the protective orders were cancelled and the close did not go through, so you hold a position with nothing behind it.

Ce faci. Act immediately — close it in NinjaTrader, or place a stop by hand.

PROTECTION SHORT

Panel — the status row

The resting stop covers fewer contracts than you hold. Part of the position is unprotected.

Ce faci. Increase the stop order to cover the whole position, or reduce the position.

R comes in two kinds, the same two the TradeLog journal uses. F is FINANCIAL: a multiple of the Risk you set for one trade, so -0.92R F means you are down 92% of one trade's risk. T is TECHNICAL: the shape of the plan on the chart, so Risk to Reward 1 : 2.0 means the target sits twice as far from entry as the stop. F is about money, T is about distance.

Panel — the status row

The two kinds of R this robot prints. F (Financial) is a multiple of the Risk you set for one trade, so it answers "how much of one trade of risk is this?". T (Technical) is the shape of the plan on the chart, so "1 : 2.0" means the target is twice as far from entry as the stop. The same two letters the TradeLog journal uses, so the robot and the journal read alike.

Ce faci. Nothing — it is a legend. Hover the "Risk to Reward (T)" caption on the panel to see it again.

Refreshing risk from TradeLog...

Panel — the status row

A Risk refresh from TradeLog is in flight.

Ce faci. Wait a moment.

Resting order — no SL/TP will attach

Panel — the status row

A pending entry from this panel is still live at the broker, but the robot has stopped tracking it. If it fills it will have no stop and no target.

Ce faci. Cancel it in NinjaTrader, or be ready to set its protection by hand.

Resting order — nothing will protect it

Panel — the status row

There is a working order on this instrument that this robot did not place. It is real exposure, and the robot will not attach protection to it.

Ce faci. Manage it where it was placed, or cancel it.

Resting order — owned by a strategy

Panel — the status row

A strategy or ATM owns the resting order, so the robot will not touch it — cancelling one leg of a bracket can leave a position unprotected.

Ce faci. Cancel it where you placed it.

Risk could not be read from TradeLog. Sizing needs a valid API key and a working connection.

Panel — the status row

The full sentence behind the line above.

Ce faci. Check the API key and the connection, then press REFRESH.

Risk is still being read from TradeLog for this account. Sizing arms as soon as it arrives.

Panel — the status row

The full sentence behind "Syncing Risk".

Ce faci. Wait a moment.

Risk trim settling

Panel — the status row

The Guardian is part-way through trimming this instrument.

Ce faci. Wait a second.

Risk unavailable

Panel — the status row

The Risk could not be read from TradeLog, so nothing can be sized.

Ce faci. Check the API key and the connection, then press REFRESH.

RISK-FREE

Panel — the status row

On the Open Risk row: your stops sit exactly at breakeven, so the trade can no longer lose.

Ce faci. Nothing.

Room left on this position

Panel — the status row

The Risk in use was reduced to the room left on an open position, so a new entry cannot push you over your limit.

Ce faci. Nothing. Close part of the position if you want more room.

Set API Key

Inside another message, where it names the reason

The link word: no API key has been entered yet.

Ce faci. Paste your key into 1.1 API Key.

Size:

Panel — the status row

A label on the position row, before the number of contracts you hold.

Ce faci. Nothing.

SL extended

Panel — the status row

The short form on the status row of the SL-extended note explained above.

Ce faci. See that note.

SL must be ABOVE entry (SHORT plan)

Panel — the status row

A short plan needs its stop above the entry, and yours is not.

Ce faci. Drag the Stop-Loss above the Entry line, or press L for a long plan instead.

SL must be BELOW entry (LONG plan)

Panel — the status row

A long plan needs its stop below the entry, and yours is not.

Ce faci. Drag the Stop-Loss below the Entry line, or press K for a short plan instead.

Stop is bigger than what you'd keep on {instrument} — use CLOSE POSITION, or resize it by hand

Panel — the status row

A partial close would leave more stop than position — the one outcome the robot refuses to create.

Ce faci. Use CLOSE POSITION, or resize the stop by hand first.

Stop-Loss required

Panel — the status row

You pressed BUY or SELL with no Stop-Loss. Without one there is no defined risk to size against.

Ce faci. Drag the Stop-Loss line to where you want it, then press again.

Strict Risk is on, so the typed override was capped down to the Risk this account trims to. A larger size would have been trimmed the moment it filled.

Panel — the status row

The full sentence behind "Override capped to Risk".

Ce faci. Nothing. Raise 2.1 Risk per trade if you want a bigger size.

SUBSCRIPTION REQUIRED

Inside another message, where it names the reason

TradeLog answered and said this account does not have an active subscription that covers the robot. This one IS about the subscription — the other three below are not.

Ce faci. Renew or upgrade at tradelog.cot-reports.com. The panel arms itself once that is done.

Syncing Risk

Panel — the status row

The Risk for this account is still being read from TradeLog.

Ce faci. Wait. Sizing arms as soon as it arrives.

The cancel could not be sent — the order is still resting.

Panel — the status row

The cancel never reached the broker. The order is still live.

Ce faci. Cancel it in NinjaTrader.

The Entry line has no usable price, so this plan cannot be sized.

Panel — the status row

The full sentence behind "No entry price".

Ce faci. Drag the Entry line onto a real price.

The entry order is resting at the broker. Its Stop-Loss and Take-Profit are NOT there yet — they are attached the moment it fills, by this robot, so leave the chart open until it does.

Panel — the status row

The full sentence behind "Order resting — SL/TP on fill".

Ce faci. Leave the chart open until it fills, so the robot can attach the protection.

The Entry, Stop-Loss and Take-Profit lines are no longer on the chart, so there is no plan to place. Press L for a LONG plan or K for a SHORT plan, then press BUY or SELL.

Panel — the status row

The plan lines were removed between drawing them and pressing.

Ce faci. Press L or K to draw them again, position them, then press BUY or SELL.

The instrument could not be read from NinjaTrader. It may read on the next attempt.

Panel — the status row

NinjaTrader did not return the instrument when you pressed.

Ce faci. Press again in a moment.

The instrument is not priced in the account currency, so this plan cannot be sized.

Panel — the status row

The full sentence behind "Currency mismatch". The robot will not invent an exchange rate.

Ce faci. Trade this instrument from an account in its own currency.

The LONG plan requires the Stop-Loss below the entry. Press K for a SHORT plan instead.

Panel — the status row

A long plan needs its stop below entry.

Ce faci. Drag the stop below Entry, or press K for a short plan.

The LONG plan requires the Take-Profit above the entry.

Panel — the status row

A long plan needs its target above entry.

Ce faci. Drag the Take-Profit above Entry.

The open position on this instrument already uses the full Risk, so adding to it would exceed it. Closing part of the position frees room for another entry.

Panel — the status row

The full sentence behind "Position already at the full Risk".

Ce faci. Close part of the position to make room, or leave it.

the order book could not be read

Inside another message, where it names the reason

Why the Guardian stood down: it could not read the orders, and it will not reduce a position behind protection it never measured.

Ce faci. Check that NinjaTrader is connected, then press REFRESH.

The order book could not be read — nothing was cancelled.

Panel — the status row

The account’s orders could not be read, so the robot cancelled nothing rather than guess.

Ce faci. Check the connection and press again.

The plan on the chart is LONG

Panel — the status row

You pressed SELL while a LONG plan is drawn, so the stop is on the wrong side for that order.

Ce faci. Press K to draw a short plan, then press SELL.

The plan on the chart is SHORT

Panel — the status row

You pressed BUY while a SHORT plan is drawn, so the stop is on the wrong side for that order.

Ce faci. Press L to draw a long plan, then press BUY.

The plan sizes to zero contracts. Check the Stop-Loss distance and the instrument's point value.

Panel — the status row

The full sentence behind "Volume = 0".

Ce faci. Move the stop closer to entry, or raise your Risk.

The position could not be read from NinjaTrader. It may read on the next attempt.

Panel — the status row

The full sentence behind "Position unavailable".

Ce faci. Wait for the next update.

The position is still not flat. NinjaTrader's own Close button is the way out of this state.

Panel — the status row

The full sentence behind "Flatten did not complete".

Ce faci. Use NinjaTrader's own Close button.

the position would be left with less stop than size

Inside another message, where it names the reason

Why the Guardian stood down: trimming would have left part of the position unprotected.

Ce faci. Add stop coverage, or reduce the position by hand.

the resizes were not accepted

Inside another message, where it names the reason

Why the Guardian stood down: NinjaTrader refused the resize attempts.

Ce faci. Resize or cancel the order by hand.

The SHORT plan requires the Stop-Loss above the entry. Press L for a LONG plan instead.

Panel — the status row

A short plan needs its stop above entry.

Ce faci. Drag the stop above Entry, or press L for a long plan.

The SHORT plan requires the Take-Profit below the entry.

Panel — the status row

A short plan needs its target below entry.

Ce faci. Drag the Take-Profit below Entry.

The Stop-Loss and Take-Profit could not be attached to the fill. This position is unprotected until they are set by hand.

Panel — the status row

The full sentence behind "Bracket attach failed". The position is open and unprotected.

Ce faci. Set a stop by hand now, or close the position. Then send us the Output window.

The TradeLog API key was rejected. Check the key in the robot inputs.

Inside another message, where it names the reason

The full sentence behind "API key invalid".

Ce faci. Re-copy the key from Settings then API Keys and paste it again.

There is a working order on this instrument that this robot did not place. It is real exposure and it can fill at any time, but TradeLog will NOT attach a Stop-Loss or a Take-Profit to it — manage it where it was placed.

Panel — the status row

The full sentence behind "Resting order — nothing will protect it".

Ce faci. Manage it where it was placed, or cancel it.

There is no bid or ask to measure a MARKET entry from yet. Wait for the next price, then press again.

Panel — the status row

The full sentence behind "No market price yet".

Ce faci. Wait for the next price and press again.

This account has not been linked to TradeLog yet, so no Risk can be read for it.

Panel — the status row

The full sentence behind "Account not linked to TradeLog".

Ce faci. Link the account in TradeLog, then press REFRESH.

TP must be ABOVE entry (LONG plan)

Panel — the status row

A long plan needs its target above the entry.

Ce faci. Drag the Take-Profit above the Entry line.

TP must be BELOW entry (SHORT plan)

Panel — the status row

A short plan needs its target below the entry.

Ce faci. Drag the Take-Profit below the Entry line.

TradeLog could not be reached. The robot keeps retrying on its own.

Panel — the status row

The full sentence behind "TradeLog disconnected". Your broker connection is not affected.

Ce faci. Check your own connection. If it is fine, ours is down — the robot keeps retrying either way.

TradeLog disconnected

Panel — the status row

TradeLog could not be reached. The robot keeps retrying on its own, and your broker connection is not affected.

Ce faci. Check your own connection. If it is fine, the problem is on our side.

TRADELOG UNREACHABLE

Inside another message, where it names the reason

The robot cannot reach TradeLog. Nothing is wrong with your subscription or your key, and your BROKER connection is untouched: charts, orders and open positions carry on normally. Sizing is off because the risk figure comes from TradeLog and we will not guess one.

Ce faci. Nothing. It keeps retrying. You can still CLOSE an open position from the panel while this is showing — closing is never blocked.

UNCAPPED

Panel — the status row

On the Open Risk row: some of your contracts have no stop behind them, so the loss on this position has no ceiling.

Ce faci. Place a stop covering the whole position.

Volume = 0

Panel — the status row

The plan sizes to zero contracts — usually a stop so far away that nothing fits inside your Risk.

Ce faci. Move the Stop-Loss closer to the entry, or raise 2.1 Risk per trade.

Without a Stop-Loss there is no defined risk, so this plan cannot be sized.

Panel — the status row

The full sentence behind "Stop-Loss required".

Ce faci. Drag the Stop-Loss line into place, then press again.

Guardian

Guardian este partea care acționează fără să apeși tu ceva, deci merită să știi exact ce face. Compară cât ar pierde o poziție deschisă dacă i s-ar atinge stopul cu riscul tău pe tranzacție. Dacă pierderea ar fi mai mare, reduce poziția până când nu mai este. Închide o parte din tranzacție; nu îți mută niciodată stopul. Cu setarea 3.2 pornită supraveghează fiecare instrument din cont, inclusiv tranzacțiile deschise în afara panoului.

Dacă Guardian găsește un ordin de stop sau limită mai mare decât poziția pe care ar trebui să o protejeze, se oprește și îți spune, în loc să acționeze. Un ordin mai mare decât poziția nu este o protecție, iar o tăiere pe baza acelei presupuneri ar putea închide o tranzacție pe care voiai să o păstrezi.

Cu robotul pe mai multe grafice ale unui cont, doar unul dintre ele taie. Celelalte o spun pe propriul panou, deci nu rămâi să ghicești care e la comandă.

Actualizarea robotului

Panoul îți spune când există o versiune mai nouă: în antet apare „Update available" cu versiunea. Actualizarea înseamnă ștergere și reimport, nu suprascriere — dacă vechiul assembly e încă instalat, NinjaTrader refuză importul cu „duplicate method names".

1Descarcă zip-ul nou din pagina Connections din TradeLog. Numele lui poartă versiunea, deci îl deosebești de cel pe care îl ai deja.
2În NinjaTrader, închide toate chart-urile pe care se află robotul.
3Control Center → Tools → Remove NinjaScript Assembly… → alege intrarea TradeLog (numele ei poartă versiunea) → Remove. NinjaTrader recompilează.
4Control Center → Tools → Import → NinjaScript Add-On… → alege zip-ul nou. Avertismentul despre add-on-urile de la terți apare din nou — apasă OK.
5Închide complet NinjaTrader și deschide-l din nou. Nu e opțional: .NET nu descarcă un assembly din memorie, deci până nu repornești, robotul care rulează e tot cel vechi — panoul arată în continuare versiunea veche și badge-ul de update, deși fișierul nou e deja pe disc.
6Redeschide chart-ul și pune robotul pe el. Verifică în antetul panoului că versiunea e cea pe care tocmai ai instalat-o.

Notează-ți cheia API și setările de risc înainte să începi — după o reinstalare s-ar putea să fie nevoie să le introduci din nou.

NinjaTrader nu poate opri acest robot

NinjaTrader dezactivează singur o strategie care rulează, la Close sau Flatten. Robotul TradeLog nu este așa ceva, deci supraviețuiește acelor acțiuni și continuă să protejeze contul.

Întrebări frecvente

Nu s-a întâmplat nimic după import. Importul pune robotul în NinjaTrader; nu îl pune pe grafic. Clic dreapta pe grafic, alege Indicators…, găsește TradeLogSyncV3 și dă dublu clic.
Dau clic pe o casetă de setare și nu intră ce tastez. Aceea este grila Parameters din NinjaTrader, nu robotul: un clic selectează celula, al doilea o deschide pentru scris.
Tranzacțiile mele vechi nu au apărut. NinjaScript nu poate citi execuții de dinainte ca robotul să ruleze. Exportă-le din Control Center, Trade Performance, Executions, și încarcă fișierul CSV în TradeLog — se contopesc pe aceleași tranzacții.
Pot să îl rulez pe două conturi? Da, pe câte grafice și conturi vrei. Ține setarea 3.2 pornită și doar un grafic pe cont face tăierea.
Panoul spune că există o actualizare. Este o înștiințare, nu o oprire. Descarcă noul fișier din Conexiuni și importă-l la fel.
Panoul arată în continuare versiunea veche și „Update available" după ce am actualizat. Încă n-ai repornit NinjaTrader. Ștergerea și importul schimbă fișierul de pe disc; copia deja încărcată în memorie rulează mai departe până când închizi și redeschizi NinjaTrader.

Dacă ceva nu merge

Un singur mesaj cu tot ce trebuie primește un răspuns folositor din prima. Iată ce să trimiți.

Răspundem în 24 de ore. Dacă trimiți din primul mesaj toate cele patru lucruri de mai jos, acel singur răspuns e de ajuns, în loc să fie primul din trei.

1Numărul versiunii, din antetul panoului.
2Ultimele 30 de rânduri din fereastra Output a NinjaTrader. Pornește setarea 6.1, apoi deschide Control Center, New, Output; reproduci problema; clic dreapta în fereastră și alegi Select All, apoi Copy.
3O captură a întregului grafic, cu panoul vizibil.
4Ce ai făcut, ce te așteptai să se întâmple și ce s-a întâmplat în schimb.

Istoricul versiunilor

3.9.1The connection light now recovers as soon as TradeLog answers again, instead of waiting for the next half-hourly check, and the panel says plainly when TradeLog cannot be reached rather than showing "Connecting" indefinitely.

3.9.0The panel now catches a stop placed on the wrong side of your position, tells you how many contracts are still unprotected, and clears leftover orders when you close.

2.4.2Stability fixes for the position panel.

Numerele de versiune sunt cele pe care le arată panoul în antetul lui. Dacă al tău e mai vechi, descarcă robotul din nou din pagina Conexiuni.

Leagă contul NinjaTrader de contul TradeLog care poartă profilul de prop firm potrivit, ca regulile și limitele tale să se aplice tranzacțiilor corecte.

Tratează cheia API ca pe o parolă. Dacă ajunge vreodată la altcineva, șterge-o din Setări, Chei API, și creează una nouă — cea veche încetează imediat să funcționeze.

Ți-a fost util acest articol?

cBot cTrader - Ghid Complet de Utilizare

Următor

Configurarea Auto-Sync Tradovate